Reference: RELAYHI2

Brand: Yoctopuce

Yocto-PowerRelay-V2

Review(s): 0
USB interface driving a tiny electromagnetic relay capable of switching directly mains powered appliances, up to 1250W. You can add Ethernet, Wireless or GSM connectivity to this device.
€26.00
More
In stock

Reference: TX010V01

Brand: Yoctopuce

Yocto-0-10V-Tx

Review(s): 0
Isolated dual 0-10V signal generator. This is what you need to control by USB any device using a 0-10V input signal, such as dimmable LED drivers. You can add Ethernet, Wireless or GSM connectivity to this device.
€88.00
More
In stock

Reference: PT100MK1

Brand: Yoctopuce

Yocto-PT100

Review(s): 0
Small device to measure the temperature with very high precision, using a PT100 temperature sensor (2, 3 or 4-wires supported). The device includes a built-in data logger to record measurements. The PT100 connection is electrically isolated from the USB bus. You can add Ethernet, Wireless or GSM connectivity to this device.
€90.75
More
In stock
All best sellers
Yocto-Watt
  • Yocto-Watt
  • Yocto-Watt
  • Yocto-Watt
  • Yocto-Watt

Yocto-Watt

YWATTMK1
Yoctopuce
Rating 

This device is a watt-meter. It will allow you to monitor the power consumption of almost any electrical device, and includes a built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.

€110.00
Tax excluded
3-5 days
Quantity
In stock

Description

This device is a digital watt-meter allowing to monitor power consumption of electrical device. Its works with both AC and DC current. Regarding AC current, the device compute the real power consumption (not just the product of RMS voltage and current), so it can be used to monitor inductive loads. The Yocto-Watt can compute the poser consumption during a given lapse of time. Accuracy will be 1mWh, 1%. 

This device is isolated, which means that the sensing part is electrically disconnected from the USB part: you can measure any voltage difference between -250V and 250V, without risk of frying your computer. The modules provides immediate reading on USB, and can also store measures on the device internal flash for later retrieval when connected again by USB.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.

USB cables and enclosure to be ordered separately.

Product Details
YWATTMK1

Data sheet

Width
50mm
Length
58mm
Weight
20g
USB connector
micro-B
Refresh rate
10Hz (DC)
Accuracy
(AC) 0.2W / 3%
(DC) 0.002W / 1.5%
Max current (Cont.)
16A
Power derating
0,67A/°C above 61°C
Max working voltage
250V AC
Normal operating temperature
5...40°C
Extended operating temperature
-30...85°C
Supported Operating Systems
Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers
no driver needed
RoHS
Yes
Suggested enclosure
YoctoBox-Watt-Transp
Reviews

No customer reviews for the moment.

Write your review

Yocto-Watt

Yocto-Watt

This device is a watt-meter. It will allow you to monitor the power consumption of almost any electrical device, and includes a built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.

Write your review
16 other products in the same category:

Reference: YMINIIO0

Brand: Yoctopuce

Yocto-IO

Review(s): 0
This device provides 4 digital I/O isolated from the USB bus. You can add Ethernet, Wireless or GSM connectivity to this device.
€59.00
More
In stock

Reference: VOLTAGE1

Brand: Yoctopuce

Yocto-Volt

Review(s): 0
This tiny device is an isolated voltage sensor, for both AC and DC. It is electrically isolated, and includes a built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.
€69.00
More
In stock

Reference: YPWMRX01

Brand: Yoctopuce

Yocto-PWM-Rx

Review(s): 0
That isolated device can decode PWM signals. It can be used as a pulse counter as well. You can add Ethernet, Wireless or GSM connectivity to this device.
€58.00
More
In stock

Reference: RX420MA1

Brand: Yoctopuce

Yocto-4-20mA-Rx

Review(s): 0
Small USB module to read very precisely the output of two 4-20mA sensors. The device can convert the current measure to the equivalent physical measure on the fly, and includes a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€92.00
More
In stock

Reference: YAMPMK01

Brand: Yoctopuce

Yocto-Amp

Review(s): 0
This tiny device is an isolated current sensor, for both AC and DC. It is electrically isolated, and includes a built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.
€80.95
More
In stock

Reference: YBUTTON1

Brand: Yoctopuce

Yocto-Knob

Review(s): 0
This USB module can read up to five push buttons, potentiometers or resistive sensors (photodiodes, etc) You can add Ethernet, Wireless or GSM connectivity to this device.
€32.00
More
In stock

Reference: RX010V01

Brand: Yoctopuce

Yocto-0-10V-Rx

Review(s): 0
Small USB module to read the output of two 0-10V sensors. The device can convert the voltage measure to the equivalent physical measure on the fly, and includes a built-in datalogger.
€88.00
More
In stock

Reference: TX420MA1

Brand: Yoctopuce

Yocto-4-20mA-Tx

Review(s): 0
Isolated 4-20mA generator. This is what you need to control by USB any device featuring a 4-20mA input. You can add Ethernet, Wireless or GSM connectivity to this device.
€39.00
More
In stock

Reference: YWMBRDG1

Brand: Yoctopuce

Yocto-MaxiBridge

Review(s): 0
USB device to precisely measure up to 4 ratiometric signals as produced by load cells, strain gauges or other sensors with a Wheatstone bridge output. The device includes zero-tracking, temperature compensation and a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€119.00
More
On demand

Reference: YWBRIDG1

Brand: Yoctopuce

Yocto-Bridge

Review(s): 0
USB device to precisely measure a ratiometric signal as produced by a load cell, strain gauge or other sensor with a Wheatstone bridge output. The device includes zero-tracking, temperature compensation and a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€89.00
More
In stock

Reference: RXMVOLT2

Brand: Yoctopuce

Yocto-milliVolt-Rx-BNC

Review(s): 0
Small USB module to measure small and very weak electric signals, with BNC connector. The device can convert the voltage measure to an equivalent physical measure on the fly, and includes a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€61.00
More
In stock

Reference: YMXBTN01

Yocto-MaxiKnob

Review(s): 0
The Yocto-MaxiKnob has been design to make it possible to build your own USB control panel with physical switches and buttons, while reducing the required electronic parts. It features 12 analog channels to read various resistive sensors, such as switches, push-buttons, potentiometers, etc. Each pair of input can also be configured to monitor a quadrature...
€89.66
More
On demand

Reference: RXMVOLT1

Brand: Yoctopuce

Yocto-milliVolt-Rx

Review(s): 0
Small USB module to measure small and very weak electric signals. The device can convert the voltage measure to an equivalent physical measure on the fly, and includes a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€54.00
More
In stock

Reference: RXUVOLT1

Brand: Yoctopuce

Yocto-MaxiMicroVolt-Rx

Review(s): 0
The Yocto-MaxiMicroVolt-Rx is a precision analog/digital converter to perform high-precision differential voltage measurements. The device provides 4 differential inputs, which are measured in round-robin loop. It provides a regulated 4.7V power supply.
€117.67
More
In stock
You might also like