Reference: RELAYHI2

Brand: Yoctopuce

Yocto-PowerRelay-V2

Review(s): 0
USB interface driving a tiny electromagnetic relay capable of switching directly mains powered appliances, up to 1250W. You can add Ethernet, Wireless or GSM connectivity to this device.
€26.00
More
In stock

Reference: TX010V01

Brand: Yoctopuce

Yocto-0-10V-Tx

Review(s): 0
Isolated dual 0-10V signal generator. This is what you need to control by USB any device using a 0-10V input signal, such as dimmable LED drivers. You can add Ethernet, Wireless or GSM connectivity to this device.
€88.00
More
In stock

Reference: PT100MK1

Brand: Yoctopuce

Yocto-PT100

Review(s): 0
Small device to measure the temperature with very high precision, using a PT100 temperature sensor (2, 3 or 4-wires supported). The device includes a built-in data logger to record measurements. The PT100 connection is electrically isolated from the USB bus. You can add Ethernet, Wireless or GSM connectivity to this device.
€90.75
More
In stock
All best sellers
Yocto-MaxiKnob
  • Yocto-MaxiKnob
  • Yocto-MaxiKnob
  • Yocto-MaxiKnob
  • Yocto-MaxiKnob

Yocto-MaxiKnob

YMXBTN01
Rating 

The Yocto-MaxiKnob has been design to make it possible to build your own USB control panel with physical switches and buttons, while reducing the required electronic parts. It features 12 analog channels to read various resistive sensors, such as switches, push-buttons, potentiometers, etc. Each pair of input can also be configured to monitor a quadrature encoder, as used by some rotary buttons. Connect them to the header pins using simple DuPont cables (jumper cables).

€89.66
Tax excluded
2 weeks
Quantity
On demand

Description

The Yocto-MaxiKnob has been design to make it possible to build your own USB control panel with physical switches and buttons, while reducing the required electronic parts. It features 12 analog channels to read various resistive sensors, such as switches, push-buttons, potentiometers, etc. Each pair of input can also be configured to monitor a quadrature encoder, as used by some rotary buttons. Connect them to the header pins using simple DuPont cables (jumper cables).

The Yocto-MaxiKnob also has an RGB LED, but it can also drive up to 150 "smart" RGB LEDs as long as they are compatible with models WS2812B, WS2812C, SK6812, WS2811 and SK6812RGBW. You can drive these LEDs directly from your code, but you can also configure the Yocto-MaxiKnob to automatically play stand-alone light sequences.

The Yocto-MaxiKnob also have a small buzzer that can not only beep, but also play simple tunes.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.

Product Details
YMXBTN01

Data sheet

Width
58mm
Length
50mm
Weight
18g
USB connector
micro-B
Channels
0...12 analog. / 0...6 quadrature
Normal operating temperature
5...40°C
Extended operating temperature
-20...70°C
Supported Operating Systems
Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers
no driver needed
RoHS
RoHS III (2011/65/UE+2015/863)
Suggested enclosure
YoctoBox-MaxiIO-Transp
IEC protection class
class III
Supported RGB LEDs
WS2812B, WS2812C, SK6812, WS2811
Supported RGBW LEDs
SK6812RGBW
Reviews

No customer reviews for the moment.

Write your review

Yocto-MaxiKnob

Yocto-MaxiKnob

The Yocto-MaxiKnob has been design to make it possible to build your own USB control panel with physical switches and buttons, while reducing the required electronic parts. It features 12 analog channels to read various resistive sensors, such as switches, push-buttons, potentiometers, etc. Each pair of input can also be configured to monitor a quadrature encoder, as used by some rotary buttons. Connect them to the header pins using simple DuPont cables (jumper cables).

Write your review
16 other products in the same category:

Reference: YCLINOM1

Brand: Yoctopuce

Yocto-Inclinometer

Review(s): 0
USB device featuring a 3D high precision inclinometer sensor. You can add Ethernet, Wireless or GSM connectivity to this device.
€90.00
More
In stock

Reference: RXUVOLT1

Brand: Yoctopuce

Yocto-MaxiMicroVolt-Rx

Review(s): 0
The Yocto-MaxiMicroVolt-Rx is a precision analog/digital converter to perform high-precision differential voltage measurements. The device provides 4 differential inputs, which are measured in round-robin loop. It provides a regulated 4.7V power supply.
€117.67
More
In stock

Reference: MXCOUPL2

Yocto-MaxiCoupler-V2

Review(s): 0
This USB device features 8 solid state relays, able to switch directly up to 48 VDC or 30 VAC r.m.s. for loads up to 1.3 A.
€108.00
More
On demand

Reference: YD096X16

Brand: Yoctopuce

Yocto-MiniDisplay

Review(s): 0
Tiny USB-driven OLED display (light blue), for text, images (96x16 pixels) and animated sequences. You can add Ethernet, Wireless or GSM connectivity to this device.
€42.00
More
On demand

Reference: YAMPMK01

Brand: Yoctopuce

Yocto-Amp

Review(s): 0
This tiny device is an isolated current sensor, for both AC and DC. It is electrically isolated, and includes a built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.
€80.95
More
In stock

Reference: RELAYHI3

Brand: Yoctopuce

Yocto-PowerRelay-V3

Review(s): 0
USB interface driving an electromechanical power relay capable of switching directly mains powered appliances, up to 1250 VA. You can add Ethernet, Wireless or GSM connectivity to this device.
€32.34
More
In stock

Reference: YD128X64

Brand: Yoctopuce

Yocto-MaxiDisplay

Review(s): 0
Small USB-driven OLED display (light blue), for text, images (128x64 pixels) and animated sequences. You can add Ethernet, Wireless or GSM connectivity to this device.
€107.00
More
In stock

Reference: YPROXIM1

Brand: Yoctopuce

Yocto-Proximity

Review(s): 0
USB proximity sensor based on infrared reflection. This device will allows you to detect objects up to 10cm. You can add Ethernet, Wireless or GSM connectivity to this device.
€22.00
More
On demand

Reference: TX010V01

Brand: Yoctopuce

Yocto-0-10V-Tx

Review(s): 0
Isolated dual 0-10V signal generator. This is what you need to control by USB any device using a 0-10V input signal, such as dimmable LED drivers. You can add Ethernet, Wireless or GSM connectivity to this device.
€88.00
More
In stock

Reference: YSDIMK01

Yocto-SDI12

Review(s): 0
This module is a USB to SDI-12 adapter, SDI-12 being a standard used by many environmental sensors. the device does not require a driver and does not install a virtual COM port.
€115.00
More
On demand
You might also like

Reference: YHUBETH1

Brand: Yoctopuce

YoctoHub-Ethernet

Review(s): 0
Hub enabling the connection of 3 Yoctopuce modules directly on the network, through an Ethernet cable, with Power-over-Ethernet support.
€120.41
More
On demand