Yocto-LatchedRelay
€32.00
Tax excluded
3-5 days
USB interface driving an electromagnetic latching relay capable of switching directly low-voltage appliances, up to 450W. You can add Ethernet, Wireless or GSM connectivity to this device.
The Yocto-LatchedRelay device contains a USB-driven latching relay switch: you can drive by software the relay input to one of the two outputs. To make it easier to test your project, two leds positioned on each side of the connector show the output currently active.
Being latched, the relay keeps its state even when the device is not powered. The Yocto-LatchedRelay also features a button and an input allowing to manually switch the relay.
The relay and the connector can stand a current of 8A. Be aware that using a relay to drive inductive loads (motors, transformers) may lead to accelerated aging of the relay. Please refer to the documentation for hints on reducing this type of problems.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.
USB cables and enclosure to be ordered separately.
YLTCHRL1
Data sheet
- Width
- 20mm
- Length
- 60mm
- Weight
- 5g
- USB connector
- micro-B
- Channels
- 146
- USB bus insulation
- 1kV
- Max working voltage
- 55V DC
- Max withholding voltage
- 500V DC
- Max switching power
- 450W
- Max switching current
- 8A
- Normal operating temperature
- 5...40°C
- Extended operating temperature
- -30...85°C
- Supported Operating Systems
- Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
- Drivers
- no driver needed
- RoHS
- RoHS III (2011/65/UE+2015/863)
- Made in
- Switzerland
- Harmonized tariff code
- 9032.9000
You might also like
USB interface driving an electromagnetic latching relay capable of switching directly low-voltage appliances, up to 450W. You can add Ethernet, Wireless or GSM connectivity to this device.