Yocto-IO-V2-C
The Yocto-IO-V2 device provides 4 digital I/O, electrically isolated from the USB bus. Each I/O bit can be configured individually as a simple input, an open-drain input (internal pull-up), a TTL/CMOS-like output, or an open-drain output (open collector).
The Yocto-IO-V2-C device provides 4 digital I/O, electrically isolated from the USB bus. Each I/O bit can be configured individually as a simple input, an open-drain input (internal pull-up), a TTL/CMOS-like output, or an open-drain output (open collector).
Without external power source, each I/O pin can receive or produce a digital signal at 3V or 5V levels (low current).
With an external power source, the device can work with voltages up to 30V and deliver up to 500mA per channel, which makes it possible to work with industrial I/O systems.
If you need more channels, you can use the Yocto-Maxi-IO-V3.
This module is the equivalent of the Yocto-IO-V2, but with a USB type-C connector. Both versions can be connected to a USB A, Type C or Micro-B host with the appropriate cable.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
-
Brand
-
ReferenceYMNIIO2C
Data sheet
-
Width20mm
-
Length60mm
-
Weight9g
-
USB connectorUSB-C
-
Channels4
-
Refresh rate250Hz
-
USB bus insulation1kV
-
ChipsetDRV8908-Q1
-
Max working voltage28V
-
Normal operating temperature5...40°C
-
Extended operating temperature-30...85°C
-
Supported Operating SystemsWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
-
Driversno driver needed
-
RoHSRoHS III (2011/65/UE+2015/863)
-
Suggested enclosureYoctoBox-Long-Thick-Black
-
Made inSwitzerland
-
Harmonized tariff code9032.9000
Comments (1)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
