USB interface driving an electromechanical power relay capable of switching directly mains powered appliances, up to 1250 VA. You can add Ethernet, Wireless or GSM connectivity to this device.
The Yocto-PowerRelay-V3 is a USB power relay. It contains a robust USB-driven SPDT relay switch: you can drive by software the relay input to one of the two outputs. To make it easier to test your project, two LEDs show the output currently active.
This device only includes a single relay, but it can drive higher loads than the Yocto-Relay and the Yocto-PowerRelay-V2. The relay and the connector can stand a current of 5A, and when put in an enclosure, the Yocto-PowerRelay-V3 can be used to switch directly appliances connected to the mains, up to 250 V AC r.m.s. in overvoltage category II.
Be aware that although this relay has a bette endurance to inductive loads than the Yocto-PowerRelay-V2, using a relay to drive inductive loads (motors, transformers) may lead to accelerated aging of the relay. Please refer to the documentation for hints on reducing this type of problems.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.
- USB connector
- Max working voltage
- 200V AC
- Max withholding voltage
- 1000V AC
- Max switching power
- Max switching current
- Normal operating temperature
- Extended operating temperature
- Supported Operating Systems
- Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
- no driver needed
- Suggested enclosure
- Made in
- IEC protection class
- Classe II
- Relay type
- OMRON G6RL-14-ASI
- Operate time
- 12ms (max)
- Release time
- 7ms (max)
- USB insulation, clearance dist.
- USB insulation, creepage dist.
- USB insulation, dielectric strength