Reference: RELAYHI2

Brand: Yoctopuce

Yocto-PowerRelay-V2

Review(s): 0
USB interface driving a tiny electromagnetic relay capable of switching directly mains powered appliances, up to 1250W. You can add Ethernet, Wireless or GSM connectivity to this device.
€28.00
More
In stock

Reference: TX010V01

Brand: Yoctopuce

Yocto-0-10V-Tx

Review(s): 0
Isolated dual 0-10V signal generator. This is what you need to control by USB any device using a 0-10V input signal, such as dimmable LED drivers. You can add Ethernet, Wireless or GSM connectivity to this device.
€90.00
More
In stock
All best sellers
Yocto-SDI12
  • Yocto-SDI12
  • Yocto-SDI12
  • Yocto-SDI12
  • Yocto-SDI12

Yocto-SDI12

YSDIMK01
Rating 

This module is a USB to SDI-12 adapter, SDI-12 being a standard used by many environmental sensors. the device does not require a driver and does not install a virtual COM port.

€115.00
Tax excluded
2 weeks
Quantity
On demand

Description

This module is a USB to SDI-12 adapter, SDI-12 being a standard used by many environmental sensors. the device does not require a driver and does not install a virtual COM port.

The Yocto-SDI12 is capable of autonomously interpreting data from any sensor a SDI-12 interface and outputting it as if it came from a Yoctopuce sensor, with all the advantages that this brings: unique identifier, polling, callback, data logger.

If required, the module can also provide a small 12V voltage source to power the SDI-12 sensor(s) to be interfaced.

The module is also capable of analyzing SDI-12 communication between two third parties without influencing the communication, and logging data separately in both directions.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.

Product Details
YSDIMK01

Data sheet

Width
20mm
Length
60mm
Weight
11g
USB connector
micro-B
Normal operating temperature
5...40°C
Extended operating temperature
-30...85°C
Supported Operating Systems
Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers
no driver needed
RoHS
RoHS III (2011/65/UE+2015/863)
Suggested enclosure
YoctoBox-Long-Thick-Black
IEC protection class
class III
Reviews

No customer reviews for the moment.

Write your review

Yocto-SDI12

Yocto-SDI12

This module is a USB to SDI-12 adapter, SDI-12 being a standard used by many environmental sensors. the device does not require a driver and does not install a virtual COM port.

Write your review
16 other products in the same category:

Reference: YRNGFND1

Brand: Yoctopuce

Yocto-RangeFinder

Review(s): 0
USB range finder sensor based on infra-red laser time-of-flight. This device can estimate distances to objects up to 1 or 2m, depending on conditions. You can add Ethernet, Wireless or GSM connectivity to this device.
€56.00
More
In stock

Reference: YGNSSMK2

Brand: Yoctopuce

Yocto-GPS-V2

Review(s): 0
GNSS receiver (for GPS, GLONASS, GALILEO satellites) with integrated data logger You can add Ethernet, Wireless or GSM connectivity to this device.
€105.18
More
In stock

Reference: SPCTRL1C

Yocto-Spectral-C

Review(s): 0
USB sensor for measuring light intensity over 13 spectral channels and deducing the corresponding color. You can add Ethernet, Wireless or GSM connectivity to this device. 
€63.62
More
On demand

Reference: DPNTKIT1

Dupont-Kit

Review(s): 0
Set of DuPont connectors with 12 tinned 25cm wires, pre-crimped with DuPond contacts
€31.18
More
On demand

Reference: Y3DMK001

Brand: Yoctopuce

Yocto-3D

Review(s): 0
USB device featuring a 3D accelerometer, a 3D gyroscope and a 3D magnetometer. This device can measure directly the 2D inclination, the magnetic orientation and provide a 3D orientation esimated based on inertial measurements. You can add Ethernet, Wireless or GSM connectivity to this device.
€55.00
More
In stock

Reference: YWBRIDG1

Brand: Yoctopuce

Yocto-Bridge

Review(s): 0
USB device to precisely measure a ratiometric signal as produced by a load cell, strain gauge or other sensor with a Wheatstone bridge output. The device includes zero-tracking, temperature compensation and a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€97.00
More
In stock

Reference: MXCOUPL2

Yocto-MaxiCoupler-V2

Review(s): 0
This USB device features 8 solid state relays, able to switch directly up to 48 VDC or 30 VAC r.m.s. for loads up to 1.3 A.
€108.00
More
On demand

Reference: TX420V2C

Brand: Yoctopuce

Yocto-4-20mA-Tx-V2-C

Review(s): 0
USB (Type-C) 4-20mA generator. This is what you need to control by USB any device featuring a 4-20mA input. You can add Ethernet, Wireless or GSM connectivity to this device.
€52.35
More
On demand

Reference: SMSEagleNXS97005G

Brand: SMSEagle Team

SMSEagle NXS-9700 5G

Review(s): 0
NXS-9700 5G is a single modem device with a sending/receiving throughput of up to 30 SMS/min. The device can be configured for device failover (HA cluster). Thanks to a built-in 5G modem, SMS messages are sent/received directly to/from 5G/LTE network without using any external 3rd party solutions.
€1,541.50
More
On demand
You might also like