Yocto-PT100-C
Small device to measure the temperature with very high precision, using a PT100 temperature sensor (2, 3 or 4-wires supported). The device includes a built-in data logger to record measurements. The PT100 connection is electrically isolated from the USB bus. You can add Ethernet, Wireless or GSM connectivity to this device. This module is available in several connector variants...
The Yocto-PT100-C is a USB temperature sensor. This is the most accurate USB temperature measurement device that we offer. The module uses an external PT100 probe (not included) to make instant temperature measurements, and can also record measures on a built-in flash memory to read them later on through USB. A PT100 probe is used to measure the temperature at any specific place, including in a liquid, with a very high stability and a high accuracy(sensibility up to 0.01°C and accuracy up to 0.03°C at 0°C when using a PT100 conforming to IEC 60751 DIN 1/10 B standard). It is particularly well suited for applications such as laboratory measurements, etc.
The Yocto-PT100-C can be used with PT100 probes using 2, 3 or 4 wires. The type of connection is setup in software. To reach the highest accuracy, a 4-wire probe should be used. 3-wire probes are reasonably accurate and not too much affected by wire lengths, contrarily to 2-wire probes which are the least accurate and very sensitive to wire length.
The Yocto-PT100-C features a built-in galvanic isolation between the USB control part and the PT100 measure circuit. It is therefore possible to use non-insulated PT100 probes, which are often more reactive and less expensive,
Given the number of variants of PT100 probes and their prices, the Yocto-PT100-C does not include any probe. The probe must be purchased separately at a specialized shop.
This module is the equivalent of the Yocto-PT100, but with a USB type-C connector. Both versions can be connected to a USB A, Type C or Micro-B host with the appropriate cable.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
-
Brand
-
ReferencePT100M1C
Data sheet
-
Thickness10.1mm
-
Width20mm
-
Length55mm
-
Weight7g
-
USB connectorUSB-C
-
Channels1
-
Refresh rate15Hz
-
Measuring range-200...325°C
-
Accuracy0.03°C
-
Sensitivity0.01°C
-
USB bus insulation1.5kV
-
Normal operating temperature5...40°C
-
Extended operating temperature-30...85°C
-
Supported Operating SystemsWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
-
Driversno driver needed
-
RoHSYes
-
Suggested enclosureYoctoBox-Long-Thick-Black
-
Cables and enclosuresavailable separately
-
Made inSwitzerland
-
Harmonized tariff code9032.9000
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)

Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent