Yocto-Light-V3
€26.00
Tax excluded
3-5 days
Ambient light sensor (luxmeter), for measuring light intensity from 0 to 100'000 lux, with built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.
The Yocto-Light-V3 device is an USB ambiant light sensor (lux meter) which will allow you to you measure ambient light up to 100'000 lux. Measurements can be directly read via USB or stored on the device internal flash for later retrieval when connected again by USB.
This device is a replacement for the Yocto-Light V1 which is not produced anymore. THe response to light is closer to human eye than the Yocto-Light-V2.
This circuit has been designed so that the sensor itself can be moved further away from the USB by a few meters: simply split the board into two parts and solder a 4-wire cable on the designated pads.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.
USB cables and enclosure to be ordered separately.
LIGHTMK3
Data sheet
- Width
- 20mm
- Length
- 35.5mm
- Weight
- 3g
- USB connector
- micro-B
- Sensor
- BH1751FVI
- Refresh rate
- 4Hz
- Measuring range
- 0...100'000lux
- Sensitivity
- 0.25lux
- Normal operating temperature
- 5...40°C
- Extended operating temperature
- -30...85°C
- Supported Operating Systems
- Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
- Drivers
- no driver needed
- Suggested enclosure
- YoctoBox-Short-Thin-Black
- Cables and enclosures
- available separately
- Made in
- Switzerland
You might also like
Ambient light sensor (luxmeter), for measuring light intensity from 0 to 100'000 lux, with built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.