Yocto-SDI12
This module is a USB to SDI-12 adapter, SDI-12 being a standard used by many environmental sensors. the device does not require a driver and does not install a virtual COM port.
This module is a USB to SDI-12 adapter, SDI-12 being a standard used by many environmental sensors. the device does not require a driver and does not install a virtual COM port.
The Yocto-SDI12 is capable of autonomously interpreting data from any sensor a SDI-12 interface and outputting it as if it came from a Yoctopuce sensor, with all the advantages that this brings: unique identifier, polling, callback, data logger.
If required, the module can also provide a small 12V voltage source to power the SDI-12 sensor(s) to be interfaced.
The module is also capable of analyzing SDI-12 communication between two third parties without influencing the communication, and logging data separately in both directions.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
-
ReferenceYSDIMK01
Data sheet
-
Width20mm
-
Length60mm
-
Weight11g
-
USB connectormicro-B
-
Normal operating temperature5...40°C
-
Extended operating temperature-30...85°C
-
Supported Operating SystemsWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
-
Driversno driver needed
-
RoHSRoHS III (2011/65/UE+2015/863)
-
Suggested enclosureYoctoBox-Long-Thick-Black
-
Made inSwitzerland
-
IEC protection classclass III
-
Harmonized tariff code9032.9000
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
Comments (0)
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent