Yocto-Watt-V2-C
This device is a watt-meter. It allows you to accurately measure the power consumption of your electrical devices, and includes a built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.
This device is a digital watt-meter, also known as energy counter, allowing you to monitor the power consumption of electrical devices. Its works with both AC and DC current. For AC measurements, the Yocto-Watt-V2-C is capable of measuring the ratio between active power and apparent power (load factor) and the voltage/current offset (cos Φ), including for loads with harmonic distortions.
Usable as a power analyzer, it is capable of providing a periodic current consumption profile with a resolution of 5.3kHz. It can also capture transient events such as consumption spikes.
This device is isolated, which means that the sensor part is electrically disconnected from the USB part: you can measure any voltage difference between -250V and 250V, without risk of frying your computer. The module provides immediate reading on USB and can also store measures on the device internal flash for later retrieval when connected again by USB.
If you are looking for a device with a USB micro B connector, you can have a look at the Yocto-Watt, but be aware that it is an older version which is less powerful.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
-
Brand
-
ReferenceYWATMK2C
Data sheet
-
Width50mm
-
Length58mm
-
Weight22g
-
USB connectorUSB-C
-
Refresh rate10Hz (DC)
-
Normal operating temperature5...40°C
-
Extended operating temperature-30...85°C
-
Supported Operating SystemsWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
-
Driversno driver needed
-
RoHSRoHS III (2011/65/UE+2015/863)
-
Suggested enclosureYoctoBox-Watt-Transp
-
Made inSwitzerland
-
Harmonized tariff code9032.9000
Comments (2)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
