Reference: PT100MK1

Brand: Yoctopuce

Yocto-PT100

Review(s): 0
Small device to measure the temperature with very high precision, using a PT100 temperature sensor (2, 3 or 4-wires supported). The device includes a built-in data logger to record measurements. The PT100 connection is electrically isolated from the USB bus. You can add Ethernet, Wireless or GSM connectivity to this device.
€95.00
More
In stock

Reference: RELAYHI2

Brand: Yoctopuce

Yocto-PowerRelay-V2

Review(s): 0
USB interface driving a tiny electromagnetic relay capable of switching directly mains powered appliances, up to 1250W. You can add Ethernet, Wireless or GSM connectivity to this device.
€28.00
More
In stock

Reference: TX010V01

Brand: Yoctopuce

Yocto-0-10V-Tx

Review(s): 0
Isolated dual 0-10V signal generator. This is what you need to control by USB any device using a 0-10V input signal, such as dimmable LED drivers. You can add Ethernet, Wireless or GSM connectivity to this device.
€90.00
More
In stock
All best sellers
RFID-Ant-13.56
  • RFID-Ant-13.56
  • RFID-Ant-13.56
  • RFID-Ant-13.56
  • RFID-Ant-13.56

RFID-Ant-13.56

RFIDANT1
Yoctopuce
Rating 

RFID 13.56Mhz Antenna with UFL (IPEX) connector

€17.65
Tax excluded
2 weeks
Quantity
On demand

Description

This 58x50mm 13.56Mhz RFID PCB antenna is the ideal companion to the Yocto-RFID-15693. Its mounting points matche those of double-size modules, allowing it to be mounted directly above the reader. A 10cm UFL cable is supplied.

If you wish to mount both the antenna and the reader in a YoctoBox-MaxiIO-Transp enclosure shown below, you'll also need a Fix-3x8mm-hex kit.

Product Details
RFIDANT1

Data sheet

Width
50mm
Length
58mm
Weight
7.2g
Normal operating temperature
5...40°C
Extended operating temperature
-40...90°C
RoHS
RoHS III (2011/65/UE+2015/863)
Suggested enclosure
YoctoBox-MaxiIO-Transp
IEC protection class
class III
Reviews

No customer reviews for the moment.

Write your review

RFID-Ant-13.56

RFID-Ant-13.56

RFID 13.56Mhz Antenna with UFL (IPEX) connector

Write your review
16 other products in the same category:

Reference: YSERIAL1

Brand: Yoctopuce

Yocto-Serial

Review(s): 0
USB to SPI adapter (3.3V or 5V), with built-in data analyser. Works without driver and without COM port. You can add Ethernet, Wireless or GSM connectivity to this device.
€66.00
More
On demand

Reference: YLTCHRL2

Yocto-LatchingRelay

Review(s): 0
The Yocto-LatchingRelay device contains a USB-driven latching relay switch: you can drive by software the relay output. To make it easier to test your project, a led shows the output state. This relay can switch up to 5A/250VAC or 5A/20VDC.
€46.40
More
In stock

Reference: YMNIIO2C

Brand: Yoctopuce

Yocto-IO-V2-C

Review(s): 0
The Yocto-IO-V2 device provides 4 digital I/O, electrically isolated from the USB bus. Each I/O bit can be configured individually as a simple input, an open-drain input (internal pull-up), a TTL/CMOS-like output, or an open-drain output (open collector).
€70.78
More
On demand

Reference: YMINIIO2

Brand: Yoctopuce

Yocto-IO-V2

Review(s): 0
The Yocto-IO-V2 device provides 4 digital I/O, electrically isolated from the USB bus. Each I/O bit can be configured individually as a simple input, an open-drain input (internal pull-up), a TTL/CMOS-like output, or an open-drain output (open collector).
€66.50
More
In stock

Reference: YGNSSMK2

Brand: Yoctopuce

Yocto-GPS-V2

Review(s): 0
GNSS receiver (for GPS, GLONASS, GALILEO satellites) with integrated data logger You can add Ethernet, Wireless or GSM connectivity to this device.
€105.18
More
On demand

Reference: RX420MA1C

Brand: Yoctopuce

Yocto-4-20mA-Rx-C

Review(s): 0
Small USB module to read very precisely the output of two 4-20mA sensors. The device can convert the current measure to the equivalent physical measure on the fly, and includes a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€102.98
More
In stock

Reference: YPWMTX01

Brand: Yoctopuce

Yocto-PWM-Tx

Review(s): 0
That device can generate two distinct PWM signals using a frequency between 1Hz and 1Mhz. You can add Ethernet, Wireless or GSM connectivity to this device.
€52.00
More
In stock

Reference: LIGHTMK4

Yocto-Light-V4

Review(s): 0
The Yocto-Light-V4 device is a USB ambient light sensor (lux meter) which allows you to measure ambient light up to 83'000 lux.
€26.14
More
In stock

Reference: RELAYHI3

Brand: Yoctopuce

Yocto-PowerRelay-V3

Review(s): 0
USB interface driving an electromechanical power relay capable of switching directly mains powered appliances, up to 1250 VA. You can add Ethernet, Wireless or GSM connectivity to this device.
€32.34
More
Out-of-Stock
You might also like

Reference: YRFIDMK1

Brand: Yoctopuce

Yocto-RFID-15693

Review(s): 0
This RFID reader can read and write data on ISO-15693 tags. It also features a small buzzer, a RGD LED and two inputs for buttons or potentiometers. You can add Ethernet, Wireless or GSM connectivity to this device.
€165.00
More
On demand