Products
Best Sellers
Yocto-PowerRelay-V2 Quick view

Reference: RELAYHI2

Brand: Yoctopuce

Yocto-PowerRelay-V2

Review(s): 0
USB interface driving a tiny electromagnetic relay capable of switching directly mains powered appliances, up to 1250W. You can add Ethernet, Wireless or GSM connectivity to this device.
€26.00
More
In stock
Yocto-0-10V-Tx Quick view

Reference: TX010V01

Brand: Yoctopuce

Yocto-0-10V-Tx

Review(s): 0
Isolated dual 0-10V signal generator. This is what you need to control by USB any device using a 0-10V input signal, such as dimmable LED drivers. You can add Ethernet, Wireless or GSM connectivity to this device.
€88.00
More
In stock
All best sellers
Yocto-MaxiKnob
  • Yocto-MaxiKnob
  • Yocto-MaxiKnob
  • Yocto-MaxiKnob
  • Yocto-MaxiKnob

Yocto-MaxiKnob

YMXBTN01
Rating 

The Yocto-MaxiKnob has been design to make it possible to build your own USB control panel with physical switches and buttons, while reducing the required electronic parts. It features 12 analog channels to read various resistive sensors, such as switches, push-buttons, potentiometers, etc. Each pair of input can also be configured to monitor a quadrature encoder, as used by some rotary buttons. Connect them to the header pins using simple DuPont cables (jumper cables).

€89.66
Tax excluded
2 weeks
Quantity
On demand

Description

The Yocto-MaxiKnob has been design to make it possible to build your own USB control panel with physical switches and buttons, while reducing the required electronic parts. It features 12 analog channels to read various resistive sensors, such as switches, push-buttons, potentiometers, etc. Each pair of input can also be configured to monitor a quadrature encoder, as used by some rotary buttons. Connect them to the header pins using simple DuPont cables (jumper cables).

The Yocto-MaxiKnob also has an RGB LED, but it can also drive up to 150 "smart" RGB LEDs as long as they are compatible with models WS2812B, WS2812C, SK6812, WS2811 and SK6812RGBW. You can drive these LEDs directly from your code, but you can also configure the Yocto-MaxiKnob to automatically play stand-alone light sequences.

The Yocto-MaxiKnob also have a small buzzer that can not only beep, but also play simple tunes.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.

Product Details
YMXBTN01

Data sheet

Width
58mm
Length
50mm
Weight
18g
USB connector
micro-B
Channels
0...12 analog. / 0...6 quadrature
Normal operating temperature
5...40°C
Extended operating temperature
-20...70°C
Supported Operating Systems
Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers
no driver needed
RoHS
RoHS III (2011/65/UE+2015/863)
Suggested enclosure
YoctoBox-MaxiIO-Transp
IEC protection class
class III
Supported RGB LEDs
WS2812B, WS2812C, SK6812, WS2811
Supported RGBW LEDs
SK6812RGBW
Reviews

No customer reviews for the moment.

Write your review

Yocto-MaxiKnob

Yocto-MaxiKnob

The Yocto-MaxiKnob has been design to make it possible to build your own USB control panel with physical switches and buttons, while reducing the required electronic parts. It features 12 analog channels to read various resistive sensors, such as switches, push-buttons, potentiometers, etc. Each pair of input can also be configured to monitor a quadrature encoder, as used by some rotary buttons. Connect them to the header pins using simple DuPont cables (jumper cables).

Write your review
16 other products in the same category:
Yocto-Bridge Quick view

Reference: YWBRIDG1

Brand: Yoctopuce

Yocto-Bridge

Review(s): 0
USB device to precisely measure a ratiometric signal as produced by a load cell, strain gauge or other sensor with a Wheatstone bridge output. The device includes zero-tracking, temperature compensation and a built-in datalogger. You can add Ethernet, Wireless or GSM connectivity to this device.
€89.00
More
In stock
Yocto-RS485-V2 Quick view

Reference: RS485MK2

Brand: Yoctopuce

Yocto-RS485-V2

Review(s): 0
USB to RS485 insulated adapter, with built-in MODBUS support. Works without driver and without COM port. You can add Ethernet, Wireless or GSM connectivity to this device.
€89.14
More
In stock
Yocto-RangeFinder Quick view

Reference: YRNGFND1

Brand: Yoctopuce

Yocto-RangeFinder

Review(s): 0
USB range finder sensor based on infra-red laser time-of-flight. This device can estimate distances to objects up to 1 or 2m, depending on conditions. You can add Ethernet, Wireless or GSM connectivity to this device.
€53.00
More
In stock
Yocto-Watt Quick view

Reference: YWATTMK1

Brand: Yoctopuce

Yocto-Watt

Review(s): 0
This device is a watt-meter. It will allow you to monitor the power consumption of almost any electrical device, and includes a built-in data logger. You can add Ethernet, Wireless or GSM connectivity to this device.
€110.00
More
In stock
Yocto-4-20mA-Tx Quick view

Reference: TX420MA1

Brand: Yoctopuce

Yocto-4-20mA-Tx

Review(s): 0
Isolated 4-20mA generator. This is what you need to control by USB any device featuring a 4-20mA input. You can add Ethernet, Wireless or GSM connectivity to this device.
€39.00
More
In stock
On sale! Yocto-RS485 Quick view

Reference: RS485MK1

Brand: Yoctopuce

Yocto-RS485

Review(s): 0
USB to RS232 isolated adapter, with built-in MODBUS support. Works without driver and without COM port. You can add Ethernet, Wireless or GSM connectivity to this device.
€66.00
More
In stock
Yocto-Thermistor-C Quick view

Reference: THRMSTR1

Brand: Yoctopuce

Yocto-Thermistor-C

Review(s): 0
USB interface allowing to connect up to 6 thermistors, PTC or NTC. All six channels share a commun wire. You can add Ethernet, Wireless or GSM connectivity to this device.
€100.00
More
In stock
Yocto-IO-V2 Quick view

Reference: YMINIIO2

Brand: Yoctopuce

Yocto-IO-V2

Review(s): 0
The Yocto-IO-V2 device provides 4 digital I/O, electrically isolated from the USB bus. Each I/O bit can be configured individually as a simple input, an open-drain input (internal pull-up), a TTL/CMOS-like output, or an open-drain output (open collector).
€66.50
More
In stock
Yocto-0-10V-Tx Quick view

Reference: TX010V01

Brand: Yoctopuce

Yocto-0-10V-Tx

Review(s): 0
Isolated dual 0-10V signal generator. This is what you need to control by USB any device using a 0-10V input signal, such as dimmable LED drivers. You can add Ethernet, Wireless or GSM connectivity to this device.
€88.00
More
In stock
You might also like
YoctoHub-Ethernet Quick view

Reference: YHUBETH1

Brand: Yoctopuce

YoctoHub-Ethernet

Review(s): 0
Hub enabling the connection of 3 Yoctopuce modules directly on the network, through an Ethernet cable, with Power-over-Ethernet support.
€121.75
More
On demand