Yocto-MaxiThermistor-C
USB type C interface allowing to connect up to 6 thermistors, PTC or NTC. You can add Ethernet, Wireless or GSM connectivity to this device. This module is available in several connector variants...
The Yocto-MaxiThermistor-C is a USB interface for NTC and PTC thermistors. It can measure up to six temperature points. Each of the six channels can be configured independently thanks to tables or reference temperatures and β coefficients. The Yocto-MaxiThermistor-C is an isolated device: there is an electric isolation between the sensor part and the USB part.
The Yocto-MaxiThermistor-C is shipped with six tiny NTC thermistors connected to a 10 centimeter wire. You can extend them with any regular electric wire.
The Yocto-MaxiThermistor-C can also be used as a multichannel ohm-meter.
This module is the equivalent of the Yocto-MaxiThermistor, but with a USB type-C connector. Both versions can be connected to a USB A, Type C or Micro-B host with the appropriate cable.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
USB cables and enclosures to be ordered separately.
-
Marca
-
ReferenciaTHRMST2C
Ficha técnica
-
Anchura58mm
-
Longueur50mm
-
Peso14g
-
Connecteur USBUSB-C
-
Canaux6
-
Fréquence de raffraichissement1Hz
-
Plage de mesure100Ω...500KΩ
-
Précision(Ω) between 1KΩ...10KΩ ~0.1%
typical (Ω) 1% -
Isolation du bus USB1.5kV
-
Temp. de fonctionnement normale5...40°C
-
Temp. de fonctionnement étendue-30...85°C
-
Systèmes d'exploitation supportésWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
-
DriversFonctionne sans driver
-
RoHSOui
-
Boîtier recommandéYoctoBox-MaxiIO-Transp
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)

Comentarios (0)
Su agradecimiento a la reseña no pudo ser enviado
Reportar comentario
Reporte enviado
Su reporte no pudo ser enviado