Yocto-MaxiPowerRelay-C
Compact USB (type-C) interface driving five electromagnetic relays able to directly switch powered appliances, up to 1250 VA per channel. You can add Ethernet, Wireless or GSM connectivity to this device. This module is available in several connector variants...
You need several USB relays in a tight form factor? The Yocto-MaxiPowerRelay controls 5 relays. Each of these relays can handle up to 250V and 5 Amp. The relay state is reflected by a LED. This module does not need external power, but the host computer or the hub to which the module is connected must be able to provide up to 250 mA.
Be aware that although these relays have a better endurance to inductive loads than the Yocto-PowerRelay-V2, using a relay to drive inductive loads (motors, transformers) may lead to accelerated aging of the relay. Please refer to the documentation for hints on reducing this type of problems.
This module is the equivalent of the Yocto-MaxiPowerRelay, but with a USB type-C connector. Both versions can be connected to a USB A, Type C or Micro-B host with the appropriate cable.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-n and to a GSM network using a YoctoHub-GSM.
USB cables and enclosures to be ordered separately.
-
Marke
-
Artikel-Nr.MXPWRLYC
Technische Daten
-
Breite58mm
-
Longueur59mm
-
Gewicht50g
-
Connecteur USBUSB-C
-
Canaux5
-
Consommation USB~250mA
-
Isolation du bus USB3kV
-
Déclassement de puissanceRev. B
-
Tension de travail max.250V AC
-
Tension de retenue max.1.5 kV
-
Puissante max commutable1250W
-
Courant max commutable5A
-
Temp. de fonctionnement normale5...40°C
-
Temp. de fonctionnement étendue-30...85°C
-
Systèmes d'exploitation supportésWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
-
DriversFonctionne sans driver
-
RoHSRoHS III (2011/65/UE+2015/863)
-
Boîtier recommandéYoctoBox-MaxiIO-Transp
-
Classe de protection IECClasse II
-
API / SDK / LibrairieC++ Obj-C C# VB.NET UWP Delphi Python Java Android LabVIEW
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)

Kommentare (0)
Ihre Bewertung der Rezension kann nicht gesendet werden
Kommentar melden
Meldung gesendet
Ihre Meldung kann nicht gesendet werden