Yocto-Altimeter-V2
USB barometric altimeter with integrated data logger You can add Ethernet, Wireless or GSM connectivity to this device.
The Yocto-Altimeter-V2 device is a USB altimeter : it will give you an altitude estimate based on atmospheric pressure. The Yocto-Altimeter-V2 is precise enough to detect 10cm altitude changes. It will also give you the current pressure and temperature. Data can be recorded on the internal flash memory, in order to build a data history that can be retrieved later on over USB.
This circuit has been designed so that the sensor itself can be moved further away from the USB connector by a few meters: simply split the board into two parts and solder a 4-wire cable on the designated pads.
This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.
-
Brand
-
ReferenceYALTIMK2
Data sheet
-
Width20mm
-
Length60mm
-
Weight4g
-
USB connectormicro-B
-
SensorICP-10100 (TDK)
-
Refresh rate8Hz
-
Measuring range(P) 250...1100mbar
0...10000m -
Normal operating temperature5...40°C
-
Extended operating temperature-20...85°C
-
Supported Operating SystemsWindows (PC + IoT), Linux (Intel + ARM), macOS, Android
-
Driversno driver needed
-
Suggested enclosureYoctoBox-Long-Thin-Black-Vents
-
Made inSwitzerland
-
IEC protection classclass III
-
Harmonized tariff code9032.9000
-
ComplianceRoHS III (2011/65/UE+2015/863)
Comments (2)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
