YoctoHub-Wireless-SR

€114.13
Tax excluded 2 weeks

Hub enabling the connection of 3 Yoctopuce modules directly on a wireless network (802.11b), with a built-in timer. This version does not have an antenna connector, but a built-in short-range PCB antenna.

Quantity
On demand

The YoctoHub-Wireless-SR is a wireless-enabled module that can host three Yoctopuce modules to access them remotely through a Wifi network. It can be powered either by a USB Micro-B cable and a regular phone charger, or a 5V battery pack. 

The YoctoHub-Wireless-SR can be used in the same way as a VirtualHub running on a little PC, but it is much easier to setup and maintain than a PC. It smaller and consume less. It is compatible out-of-the-box with all existing applications using Yoctopuce API. As for the VirtualHub, it can run autonomously using HTTP callbacks. 

Moreover, the YoctoHub-Wireless-SR features a built-in clock timer, that makes it possible to put the device into low-power deep sleep and wake-up automatically at predefined time. This makes it possible to reduce power consumption to 15uA while sleeping, which is crucial for applications running on battery or solar panels. The YoctoHub-Wireless-SR only needs a few seconds of wake-up time to post data on an web server using the HTTP callback. 

Three Yoctopuce modules can be connected directly, one of which can be fixed directly on the YoctoHub-Wireless-SR and connected using a Board2Board-127 connector. More devices can be connected thanks to the YoctoHub-Shield extension. The YoctoHub-Wireless-SR can power Yoctopuce devices up to 2A. 

Contrarily to the YoctoHub-Wireless, which looks very similar, this version does not include an antenna connector but uses a tiny antenna directly integrated on the PCB. It takes less space, but should only be used in applications when there is a good wireless connectivity, away from any strong electromagnetic interference. 

Warning: although the 3 downstream ports hosting Yoctopuce devices use USB micro-B connectors, the YoctoHub-Wireless-SR use a specific protocol simpler than USB to talk to the devices. Therefore, it is not possible to drive or even to power a regular (non-Yoctopuce) device using the YoctoHub-Wireless-SR. It is not possible neither to use a regular USB hub (such as the Micro-USB-Hub) on the downstream ports. If you need more downstream ports for Yoctopuce devices, you can use a YoctoHub-Shield.

USB cables and enclosure to be ordered separately.

* *
YHUBWLN2

Data sheet

Thickness
8.1mm
Width
58mm
Length
60mm
Weight
30g
USB connector
micro-B
Channels
3ports
Max current (Cont.)
2A
USB consumption
110mA
Network connection
802.11b
Normal operating temperature
5...40°C
Extended operating temperature
-30...85°C
Supported Operating Systems
Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
RoHS
Yes
Suggested enclosure
YoctoBox-HubWlan-Transp
Made in
Switzerland
*