Yocto-IO

€59.00
Tax excluded 3-5 days

This device provides 4 digital I/O isolated from the USB bus. You can add Ethernet, Wireless or GSM connectivity to this device.

Quantity
In stock

The Yocto-IO device provides 4 digital I/O, electrically insulated from the USB bus. Each I/O bit can be configured individually as a simple input, an open-drain input (internal pull-up), a TTL/CMOS-like output or an open-drain output (open collector). 

Without external power source, each I/O pin can receive or produce a digital signal at 3V or 5V levels (low current). 

With an external power source, the device can work with voltages up to 28V and deliver up to 250mA per channel, which makes it possible to drive small relays for instance. 

If you need more channels, you can use the Yocto-Maxi-IO-V2.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.

USB cables and enclosure to be ordered separately.

* *
YMINIIO0

Data sheet

Width
20mm
Length
60mm
Weight
9g
USB connector
micro-B
Channels
4
Refresh rate
250Hz
USB bus insulation
1kV
Chipset
NCV7608
Max working voltage
28V
Normal operating temperature
5...40°C
Extended operating temperature
-30...85°C
Supported Operating Systems
Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers
no driver needed
RoHS
Yes
Suggested enclosure
YoctoBox-Long-Thick-Black
Made in
Switzerland
*

You might also like