Yocto-Thermistor-C

€100.00
Tax excluded 2 weeks

USB interface allowing to connect up to 6 thermistors, PTC or NTC. All six channels share a commun wire. You can add Ethernet, Wireless or GSM connectivity to this device.

Quantity
On demand

The Yocto-Thermistor-C is an USB interface for NTC and PTC thermistor. It can measure up to six temperature points. Each of the six channels can be configured independently thanks to tables or reference temperatures and β coefficients. The Yocto-Thermistor-C is an insulated device: there is an electric insulation between the sensor part and the USB part. 

The Yocto-Thermistor-C is shipped with six tiny NTC thermistors connected to a 10 centimeter wire. You can extend them with any regular electric wire. 

All six channels share one contact allowing the use of a bigger terminal and bigger wire (26-16 AWG). If you wish to connect the thermistors in a independent, manner choose the Yocto-MaxiThermistor. 

The Yocto-Thermistor-C can also be used as a multichannel ohm-meter.

This device can be connected directly to an Ethernet network using a YoctoHub-Ethernet, to a WiFi network using a YoctoHub-Wireless-g, it can even be connected to a GSM network thanks to the YoctoHub-GSM.

USB cables and enclosure to be ordered separately.

* *
THRMSTR1

Data sheet

Width
58mm
Length
50mm
Weight
17g
USB connector
micro-B
Channels
6
Refresh rate
1Hz
Measuring range
100Ω...500KΩ
Accuracy
(Ω) between 1KΩ...10KΩ ~0.1%
typical (Ω) 1%
USB bus insulation
31.5
Normal operating temperature
5...40°C
Extended operating temperature
-30...85°C
Supported Operating Systems
Windows (PC + IoT), Linux (Intel + ARM), macOS, Android
Drivers
no driver needed
RoHS
Yes
Suggested enclosure
YoctoBox-MaxiIO-Transp
Made in
Switzerland
*